Holden - Body Control Module

From Holden
(Redirected from Holden:BCM)
Jump to navigation Jump to search

The Body Control Module, or BCM, is responsible for most of the car's ancillary functions unrelated to the power-train. These include; illumination, central locking, remote lock/unlock, power windows and more.

Body Control Module from a VZ Commodore

VT/VX/VY/VZ Commodores

The BCM for these Commodores is located above the foot-well on the driver's side of the vehicle. There are four BCM types for these vehicles, depending on the body type and badge. These are; Low, Mid, High, and Lux. Low level BCM modules are used for vehicles without power windows. Mid level BCM modules are fitted to vehicles with power windows (such as the Executive, Acclaim, S and SS models). Lux BCM modules are fitted to Berlina and select Calais models while High level BCM modules are fitted to Calais models and Statesmans. The table below lists the features available on each BCM level.

BCM Function LOW MID LUX HIGH
Central Door Locking Y Y Y Y
Boot Release Y Y Y Y
Electric Windows N Y Y Y
Electric Radio Antenna N N Y Y
Internal Dome Light Y Y Y Y
Rear Light Failure Warning Light N N N Y
Wiper Speed Variable Action N N Y Y
Wiper Fixed Dwell Action Y Y N N
Wagon Rear Wiper Control N Y Y N
Speed Sensitive Power Steering N N N A
Instrument Light Dimming N N Y Y
Automatic Lights Off Y Y Y Y
Twilight Lights On N N N Y
Anti-Theft N N Y Y
Engine Disable Y Y Y Y
Radiator Low-Speed Fan Y Y Y Y
Priority Key System N N N Y
Cruise Control Interface Y Y Y Y
SRS Shutdown Y Y Y Y
Serial Data Interface Y Y Y Y
Heated Rear Window Control Y Y N N
Air Conditioning Interface Y Y N N

ALDL

The VT/VX/VY/VZ Commodores have a primary serial bus, and an optional auxiliary serial bus. The BCM is the bus master of the primary serial bus. Vehicles equipped with a High or Lux level BCM feature an auxiliary serial bus for the purpose of isolating ancillary modules such as the climate control module and the radio from the power-train. Vehicles without an auxiliary serial bus place the radio on the primary bus with the PCM, ABS and SRS modules. The primary serial bus can usually be identified as a red wire with a black stripe whilst the auxiliary serial bus can usually be identified as a green wire with a white stripe. The BCMs on VT/VX/VY/VZ Commodores can be controlled via ALDL using Mode 4 commands. The BCM on these models is addressed on the ALDL bus using message ID F1. The table below lists just some of the commands that can be issued to a BCM over ALDL.[1]

Commands
ID Mode Bytes Function
F1 04 66 04 00 00 01 00 00 00 00 00 01 00 00 00 00 00 00 00 Turn Interior Light On
F1 04 66 04 00 01 00 00 00 00 00 01 00 00 00 00 00 00 00 00 Turn Indicators On (Not Flashing)
F1 04 66 04 00 00 40 00 00 00 00 00 40 00 00 00 00 00 00 00 Turn A/C LED On
F1 04 66 04 00 00 04 00 00 00 00 00 04 00 00 00 00 00 00 00 Turn Low Speed Fan On
F1 04 66 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 02 Central Locking Lock
F1 04 66 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 03 Central Locking Deadlock
F1 04 66 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 Central Locking Unlock Driver
F1 04 66 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 01 Central Locking Unlock All
F1 04 66 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 04 Pop Boot Lock
F1 04 66 04 00 00 80 00 00 00 00 00 80 00 00 00 00 00 00 00 Operate Front Wipers
F1 04 66 04 00 08 00 00 00 00 00 08 00 00 00 00 00 00 00 00 Drivers Window Down
F1 04 66 04 00 04 00 00 00 00 00 04 00 00 00 00 00 00 00 00 Passenger Window Down
F1 04 66 04 00 40 00 00 00 00 00 40 00 00 00 00 00 00 00 00 Power Window Relay
F1 04 66 04 00 00 10 00 00 00 00 00 10 00 00 00 00 00 00 00 Horn
F1 04 66 04 00 02 00 00 00 00 00 02 00 00 00 00 00 00 00 00 Illumination Relay

References